Complete Home Inspection LLC

Website: http://www.yourcompletehomeinspection.com
Company email: ron@yourcompletehomeinspection.com
Inspector's email: completehomeinspec@yahoo.com
Company phone: (574) 904-4459
Inspector's phone: (574) 904-1304
P.o. Box 1061 
New Carlisle, IN 46552
Inspector: Ron Colpitts
HI00800074

 

Property Inspection Report
Client(s): Tyler Hora
Property address: 33747 Woodmont Ridge
New Carlisle, Indiana 46552
Inspection date: 04/06/2010
This report published on Tuesday, April 06, 2010 8:02:54 PM EDT

View summary page

This report is the exclusive property of this inspection company and the client(s) listed in the report title. Use of this report by any unauthorized persons is prohibited.

 
How to Read this Report
This report is organized by the property's functional areas.  Within each functional area, descriptive information is listed first and is shown in bold type.  Items of concern follow descriptive information.
Concerns are shown and sorted according to these types:
SafetyPoses a risk of injury or death 
Major DefectCorrection likely involves a significant expense 
Repair/ReplaceRecommend repairing or replacing 
Repair/MaintainRecommend repair and/or maintenance 
Minor DefectCorrection likely involves only a minor expense 
MaintainRecommend ongoing maintenance 
EvaluateRecommend evaluation by a specialist 
CommentFor your information 

Click here for a glossary of building construction terms.  Contact your inspector if there are terms that you do not understand, or visit the glossary of construction terms at http://www.reporthost.com/glossary.asp

Table of Contents
General information
Exterior
Roof
Garage
Attic
Electric service
Water heater
Heating and cooling
Plumbing and laundry
Fireplaces, woodstoves and chimneys
Basement
Well
Kitchen
Bathrooms
Interior rooms
 
General information Return to table of contents
Inspector: Ron Colpitts
Type of building: Single family
Age of building: 7 ears
Time started: 12:30
Time finished: 2:00 Pm
Payment method: Escrow
Present during inspection: Client(s)
Occupied: No
Weather conditions: Cloudy
Temperature: Warm
Ground condition: Dry
Front of structure faces: South
Main entrance faces: South
Foundation type: Unfinished basement
The following items are excluded from this inspection: Private sewage disposal system, Security system, Irrigation system, Private well, Playground equipment, Low voltage outdoor lighting, Water filtration system, Water softener system
 
Exterior Return to table of contents
Footing material: Poured in place concrete
Foundation material: Poured in place concrete
Apparent wall structure: Wood frame
Wall covering: Composition wood clapboard
Driveway material: Poured in place concrete
Sidewalk material: Poured in place concrete
Exterior door material: Solid core steel
1) Cover plate(s) are broken at one or more electric boxes, such as for receptacles, switches and/or junction boxes. They are intended to contain fire and prevent electric shock from exposed wires. This is a safety hazard due to the risk of fire and shock. Cover plates should be replaced where necessary.This was found on the west side of the house.

Photo 14  
 

2) One or more unlined wooden planter boxes are attached to the side of the house. Wood soil contact exists in such boxes and is a conducive condition for wood-destroying insects and organisms. Recommend either removing them, or modifying them so that no wood-soil contact exists (install plastic or metal liners), and so that they are well drained.

Photo 12  
 

3) One or more gutters are damaged. This can result in water accumulating around the structure's foundation, or in basements and crawl spaces if they exist. Accumulated water is a conducive condition to wood destroying insects and organisms, and may also cause the foundation to settle and possibly fail over time. A qualified contractor should replace or repair gutters where necessary.

Photo 15  
 

4) Gaps exist at one or more openings around the exterior, such as those where outside faucets, refrigerant lines, and/or gas supply pipes penetrate the exterior. Gaps should be sealed as necessary to prevent moisture intrusion and entry by vermin.

Photo 16  
 

5) Vegetation such as trees, shrubs and/or vines are in contact with or less than one foot from the structure's exterior. Vegetation can serve as a conduit for wood destroying insects and may retain moisture against the exterior after it rains. Vegetation should be pruned and/or removed as necessary to maintain a one foot clearance between it and the structure's exterior.

Photo 10  

Photo 11  

6) The substructure of the deck is excluded from the inspection due to limited access because of the low height.
 
Roof Return to table of contents
Roof inspection method: Traversed
Roof type: Gable
Roof covering: Asphalt or fiberglass composition shingles
Gutter & downspout material: Aluminum
Roof ventilation: Adequate
7) The siding on one or more exterior walls above lower roof sections is in contact with or has less than a one inch gap between it and the roof surface below. A gap of at least one inch is recommended so water isn't wicked up into the siding from the shingles below, and also to provide room for additional layers of roofing materials when the current roof surface fails. Recommend having a qualified contractor make repairs as necessary, such as trimming siding, so at least a one inch gap exists between the siding and the roofing below where necessary.Thgis was noted at the dormers.
8) Debris has accumulated in one or more gutters. This is a conducive condition for wood destroying insects since gutters may overflow and cause water to come in contact with the structure's exterior or make water accumulate around the foundation. Gutters should be cleaned now and as necessary in the future.

Photo 2  

Photo 3  

Photo 7  
 

9) Debris such as leaves, needles, seeds, etc. have accumulated on the roof. This is a conducive condition for wood destroying insects and organisms since water may not flow easily off the roof, and may enter gaps in the roof surface. Leaks may occur as a result. Debris should be cleaned from the roof now and as necessary in the future.

Photo 4  
 

10) Trees are overhanging roof and are within 10 feet of roof vertically. This is a conducive condition for wood destroying insects and organisms since organic debris such as leaves or needles are more likely to accumulate on the roof surface. Accumulated debris may cause water to enter gaps in the roof surface and leak into attic and/or interior spaces. Trees should be pruned so they are at least 10 feet above roof, or don't overhang the roof.

Photo 9  
 

11)   Dormer windows appear to be partially obscured by a wood destroying organism. Reccomend having a qualified contractor add vents to create a better air flow

Photo 8  
 

12)   Views of roof

Photo 5  
 

13)   Questionable flashing reccomend monitoring to make sure that it works as intended

Photo 6  
 
 
Garage Return to table of contents

14) One or more sections of wiring that weren't terminated were found. This is a potential safety hazard due to the risk of shock. A qualified electrician should evaluate and repair as necessary. For example, cutting the wire to length and terminating the wire with wire nuts in a securely anchored, covered, properly sized junction box.This was found throughout the garage it appears that previouse home owner was in the middle of finishing garage.

Photo 28  

Photo 29  

15) Wire splices are exposed due to not being contained in a covered junction box. This is a safety hazard due to the risk of shock and fire. A qualified electrician should evaluate and make repairs as necessary. For example, install securely mounted junction boxes with cover plates where needed to contain wiring splices.

Photo 30  
 

16) Cover plate(s) are missing from one or more electric boxes, such as for receptacles, switches and/or junction boxes. They are intended to contain fire and prevent electric shock from exposed wires. This is a safety hazard due to the risk of fire and shock. Cover plates should be installed where missing.

Photo 31  
 

17)   Electrical subpanels have wires not terminated loose in the box.

Photo 32  
 
 
Attic Return to table of contents
Inspection method: Partially traversed
Roof structure type: Trusses
Ceiling structure: Trusses
Insulation material: Cellulose loose fill
18) One or more sections of wiring that weren't terminated were found. This is a potential safety hazard due to the risk of shock. A qualified electrician should evaluate and repair as necessary. For example, cutting the wire to length and terminating the wire with wire nuts in a securely anchored, covered, properly sized junction box.

Photo 33  
 

19) Some attic areas were inaccessible due to lack of permanently installed walkways, the possibility of damage to insulation, low height and/or stored items. These areas are excluded from this inspection.

Photo 25  

Photo 26  

Photo 27  
 
 
Electric service Return to table of contents
Primary service type: Underground
Primary service overload protection type: Circuit breakers
Service amperage (amps): 200
Service voltage (volts): 120/240
Location of main service switch: In the basement on west wall
Location of sub panels: In the garage on the south wall by entry door
Location of main disconnect: Breaker at top of main service panel
Service entrance conductor material: Aluminum
System ground: Cold water supply pipes
Main disconnect rating (amps): 200
Branch circuit wiring type: Non-metallic sheathed
Solid strand aluminum branch circuit wiring present: No
Smoke detectors present: Yes
20) One or more loose conductors in the main service panel have bare ends and are not connected to an overcurrent protection device (circuit breakers or fuses). This is a safety hazard due to the risk of fire if the bare conductors come into contact with other components in the panel. A qualified electrician should evaluate and repair as necessary. For example, removing wires that aren't terminated or installing wire nuts.

Photo 22  
 

21)   View of main service panel.

Photo 21  
 
 
Water heater Return to table of contents
Estimated age: 7 Years
Type: Tank
Energy source: Natural gas
Capacity (in gallons): 50
Manufacturer: A.O. Smith
Model: FPSH75262
 
Heating and cooling Return to table of contents
Estimated age: 7 Years
Primary heating system energy source: Natural gas
Primary heat system type: Forced air
Primary A/C energy source: Natural Gas
Primary Air conditioning type: Split system
Distribution system: Sheet metal ducts
Manufacturer: Armstrong
Model: G1D93AV067D12B-1A
22) The last service date of this system appears to be more than one year ago, or the inspector was unable to determine the last service date. The client(s) should ask the property owner(s) when it was last serviced. If unable to determine the last service date, or if this system was serviced more than one year ago, a qualified heating and cooling contractor should inspect, clean, and service this system, and make repairs if necessary. For safety reasons, and because this system is fueled by gas or oil, this servicing should be performed annually in the future. For more information visit: http://www.cpsc.gov/CPSCPUB/PREREL/prhtml05/05017.html
 
Plumbing and laundry Return to table of contents
Location of main water shut-off valve: Basement
Water service: Private
Service pipe material: Copper
Supply pipe material: Copper
Vent pipe material: Plastic
Drain pipe material: Plastic
Waste pipe material: Plastic
23) No ground fault circuit interrupter (GFCI) protection device is visible for the sump pump electric supply. A qualified electrician should determine if a GFCI protection device (receptacle or circuit breaker) exists for the sump pump and install one if missing to reduce the danger of electric shock.

Photo 20  
 

24) The sump pump's power supply appears to be on a circuit shared with other receptacles or fixtures. Sump pumps should be on a dedicated circuit so it doesn't stop working when other equipment malfunctions. A qualified electrician should evaluate and make repairs as necessary.
25)   View of water pressure gage on the expansion tank.

Photo 19  
 
 
Fireplaces, woodstoves and chimneys Return to table of contents
Fireplace type: Metal prefabricated
26) Enclosur for fire place is loose and may fall down on a small child and cause injury or death. Reccomend having a qualified contractor securly mount enclosure.
27) A "Vent-free" gas fireplace is installed. While these are legal in some municipalities, the client(s) should be aware that exhaust gases from these appliances are vented directly into the living space where they are located. Exhaust gases may contain very high levels of moisture (up to 25%), which can be be detrimental to a house over time. Additionally, some unpleasant odors may be emitted.
 
Basement Return to table of contents
Pier or support post material: Steel
Beam material: Laminated wood
Floor structure above: Engineered wood joists
28) Wire splices are exposed due to not being contained in a covered junction box. This is a safety hazard due to the risk of shock and fire. A qualified electrician should evaluate and make repairs as necessary. For example, install securely mounted junction boxes with cover plates where needed to contain wiring splices.Live wire are exposed as so a person can be shocked and a risk of fire is possible.

Photo 17  
 

29) The entire basement appears to be in the middle of being finished off by past owner. Reccomend having basement electrical evaluated and finished by a qualified electrician
30) One or more sections of wiring that weren't terminated were found. This is a potential safety hazard due to the risk of shock. A qualified electrician should evaluate and repair as necessary. For example, cutting the wire to length and terminating the wire with wire nuts in a securely anchored, covered, properly sized junction box.
31) Cover plate(s) are missing from one or more electric boxes, such as for receptacles, switches and/or junction boxes. They are intended to contain fire and prevent electric shock from exposed wires. This is a safety hazard due to the risk of fire and shock. Cover plates should be installed where missing.

Photo 18  
 

32) One or more electric receptacles appear to have no power. Recommend asking the property owner(s) about this. Switches may need to be operated to make some receptacles energized. If necessary, a qualified electrician should evaluate and make repairs as necessary.
 
Well Return to table of contents
Location of well equipment: Basement
Location of tank shut off valve: Basement
33) Recommend having the well water tested for coliform bacteria, nitrates, and anything else of local concern, by a qualified lab. For more information, visit http://www.wellowner.org
 
Kitchen Return to table of contents

34) The range hood fan vents into the kitchen rather than outdoors. Ventilation may be inadequate and moisture may accumulate indoors. Recommend having a qualified contractor make modifications as necessary as per standard building practices so the range hood fan vents outdoors.
 
Bathrooms Return to table of contents

35) One or more wall-mounted electric switches are within reach of shower stalls. This is a safety hazard due to the risk of shock. At a minimum, the client(s) should be aware of the shock hazard this represents and never operate such switches while showering. Ideally, a qualified electrician should evaluate and move switches as necessary, or a qualified contractor should make modifications as necessary so wall switches are unreachable from shower stalls.Fan switch in Master Bath.
36) The inspector was unable to determine if ground fault circuit interrupter (GFCI) protection is installed for the jetted tub's electric supply due to lack of access to the equipment below the tub. If no GFCI protection is installed, then this is a safety hazard due to the risk of shock. A qualified contractor and/or electrician should evaluate and install GFCI protection if none exists. If necessary, modifications should be made to allow access to the GFCI device for periodic evaluation and to reset it when it trips.
37) One or more sinks is loose, or not securely attached to the wall behind it. A qualified contractor should evaluate and repair as necessary.Pedistal sink in hall bath.

Photo 24  
 

38)   Faucets on jetted tub are backwards reccomend installing properly

Photo 23  
 
 
Interior rooms Return to table of contents

39) Batteries in all the smoke alarms should be replaced after taking occupancy, and annually in the future. "Chirping" noises emitted from smoke alarms typically indicate that batteries need replacing. For more information, visit http://www.cpsc.gov/cpscpub/pubs/5077.html
40) One or more air supply registers are loose or installed in a substandard way. Repairs should be made as necessary so registers are securely attached, flush with the surface they are installed on, and otherwise correctly installed.This was found by the front door.
41) Screen(s) in one or more windows are torn or have holes in them. Screens should be replaced where necessary.This was found on slider in the back.

Photo 13  
 

 
The inspection and report will be preformed according to the Standards of the American Society of Home Inspectors (ASHI) the terms in this agreement shall have the same meaning given to them in the ASHI standards. A copy of the ASHI standards will be provided at the client’s request. Visit www.ashi.org for further information.